By the time the quad frame had arrived from Australia (only took about 5 days) I had already got a few parts for the build. I am not going to go into technical details about all the individual parts, just a brief description of what they are and what they do. I much more enjoy the actual build process and will try to give some tips and ideas for the best way to put one of these together.
Here's a pic of the first pre-assembly. As you can see a few bits are getting their first fit. The motors are T-Motor MN1806. There were no suitable bolts supplied for mounting the motors so I used some M2 x 5mm stainless socket head screws purchased off ebay. The flight control board is
Openpilot CC3D by readymaderc and the video TX is a 5.8ghz 600mw Immersionrc unit.
No comments:
Post a Comment